Wealth Success

SANKI COMPANY LIMITED

SANKI POWER LOCK, SNAKI FEEDER, SANKI CLAMP, SANKI BRAKER.

SANKI PRODUCTS PARTS FEEDING SYSTEM SANKI PARTS FEEDING SYSTEM greatly promote the productivity in the machining firms and assembling lines. PIEZO FEEDER is employing piezo-electric element made of fine ceramics to it's driving unit which is superior in it's fast feeding speed, durability and adaptability to sizel shape and material of parts. CLAMP ELEMENT Connecting shaft with hub especially serviceable to motor pulley of frequent torque change. Simple but tight. SBV BRAKE MOTOR 丂丂 Customers will be satisfied with it's durability in hard conditions and with it's reliable action at electric stopage or emergency stop. SANKI AIR BRAKE MOTOR Response to the request for brake motor with longer life, easier maintenance and greater reliability.

PARTS FEEDER PAGE INDEX 　　★　PIEZO FEEDER OUTSTANDING FEATURES 　　　　☆　PIEZO FEEDER LINE UP 　　　　　　BOWL FEEDER/INLINE FEEDER/CONTROLLER 　　　　　　　☆　SANKI PARTS FEEDING SYSTEM OFFICE & FACTORY -------------------------------------------------------------------------------- The drive source for this piezo-type feeder is a piezo resonator(element) made of fine ceramics that consist of lead titanate and lead zirconate. The direct drive works off the piezo effect resulting from strain when voltage is applied. This provides the highly effective feed you find on this innovative feeder. OUTSTANDING FEATURES 1. No spring Adjustment Needed Easy controller frequency setting for ideal operation. No variation with use over the years. No need for adjustments of oscillating spring at a time of assembly or for 50/60 Hz areas. 2. Wide Range of Feed Speeds Just by a change of voltage control. 3. Steady, Consistent Feeds Always steady,stable feeding,no matter what the environment or power fluctuation might be. 4. No Electromagnetic Effect on Parts Easy tooling. No electromagnetic effects of drive system whatsoever upon small parts or magnetic work. 5. Ideal for Small,Thin Parts Feed Direct spring drive for large oscillation ideal for small, thin work feeds. 6. Big Energy Savings The electromechanical conversion efficiency of the piezo resonator is very high,assuring great energy savings of 1/20 to 1/30. 7. Good for 100 or 200 Volts The special controller can be used with either 100 or 200V.

PIEZO FEEDER LINEUP BOWL FEEDER Built for a wide range of applications,this feeder can be equipped with various bowls at the desired position by means of center or peripheral lock systems.Other than the standard-equipped bowls can be installed with the special top plate installing holes available. The drive system is extremely simple,electromechanically speaking. No coils,no rotor. Long service life. Model Standard bowl dia.(mm) Max bowl dia.(mm) Max bowl weight(kg) PEF-90A 90 120 0.3 PEF-120A 120 150 0.6 PEF-150A 150 250 2 PEF-190A 190 310 3 PEF-230A 230 370 5 PEF-300A 300 500 8 PEF-390A 390 620 14 -------------------------------------------------------------------------------- INLINE FEEDER The outstanding feature is that the leak spring adjustment is not required, since the controller is equipped with a frequency modulator. The unit incorporates a direct drive system, a jointspring system, a rubber mount feature-all of which means you have a wide selection to meet your application requirements. - DIRECT DRIVE - Simple construction for maximum feed velocity. There is direct rebound to the stand, so this feature only comes on small feeders. Model Overall chute length max.(mm) Max Chute weight(kg) PEF-L5A 200 0.2 PEF-L15A 250 0.3 - JOINT SPRING SYSTEM - The drive section and stand have a joint spring in between to secure them,lessening rebound to stand itself. Smooth, feed is assured for medium to large work applications. Model Overall chute length max.(mm) Max Chute weight(kg) PEF-L25A 300 0.5 PEF-L60A 350 1.2 PEF-L125A 500 2.5 - RUBBER MOUNT FEATURE - The rubber-mounted unit is vibration-damped so that even desktop application is possible. Ideal for medium to large parts feeding. Model Overall chute length max.(mm) Max Chute weight(kg) PEF-L30AG ３００ 0.6 PEF-L75AG ４００ 1.5 PEF-L150AG ５００ 3.0 PEF-L200AG ６００ 4.0 PEF-L250AG ７００ 5.0 -------------------------------------------------------------------------------- CONTROLLER These piezo parts feeder controllers incorporate a new kind of pulse width modulation control that allows variation of voltage and frequency levels in a very compact unit. In the standard model you find an ON-OFF signal terminal that works off optical sensor, and either DC12 or 24V is available. The power unit is built in, so ON-OFF control can be effected by non-voltage contacts. SENSOR-TIMER CONTROLLER This is a compact high-performance digital controller for a one-chip microcomputer developed precisely for piezo feeder appllications. With either 100 or 200V capacity. Your choice of either amp-equipped sensor or no-amp optical sensor.

CLAMP ELEMENTS For Shaft & Boss Fastening TYPE SCE200 Type SCE200 is a clamp element for connecting shafts and bosses requiring a large transfer torque. It is simple to install, and no other parts are needed. The applicable shaft diameter is 20 to 400 mm, and boss and shaft fittings may be up to H9/h9 size. For the shaft, drawn steel may be used. Applications Flywheels, pulleys, gears, conveyor drums, hollow shafts, cams, levers, etc. Standard Range d =φ19 ～ φ400 Special sizes made to order. TYPE SCE201 Series Type SCE201 Series has, besides the Type SCE200 features, a specially enhanced shaft and boss "centering effect." The shaft and boss fitting may be up to H8/h8. The "L"type in particular is a low contact surface pressure model. It may be used for hollow shafts and aluminum bosses not requiring a relatively high torque. Applications In addition to the Type SCE200 applications, this type is ideal for timing pulleys with small boss width. Standard Range d =φ19 ～ φ100 Special sizes made to order. TYPE SCE250 Type SCE250 can be installed in a minimum space with only a nut. No other parts are required, and no space is needed to install a type C spanner in the axial direction. The hub and shaft fitting can be up to H8/h8. Applications Long shafts for textile machinery, railway wheels, fans, agitators, rollers and the like. Standard Range d =φ6 ～ φ75 Special sizes made to order. TYPE SCE300 Type SCE300 requires very little space in the radial installing direction. Up to four clamp elements can be arranged in series, making possible a greater torque transfer. The connection is made through a flange or thrust ring. The boss and shaft fitting can be up to H7/h6. Applications Crankshafts, pumps, cams, gear parts, brake discs, sprocket wheels, etc. Standard Range d =φ5 ～ φ200 Special sizes made to order

SANKI POWER LOCK, SNAKI FEEDER, SANKI CLAMP, SANKI BRAKER.